Oil squirters of JE or CP forged pistons

N

neo2694

New Member
I have seen, erics sell a 1.2mm head gasket with 87mm bore size.

Can I fit this head gasket with 86mm forged pistons or this is just for 87mm pistons?


Thx
 
KF79GTIR

KF79GTIR

New Member
Right both of you are asking the wrong people if you message the bloke tell him where you heard of him and he will be able to answer all your questions just because things arnt listed in his shop doesnt mean he wont have or be able to get it...
 
J

jpward

Guest
nismo-400R said:
im about to buy a set of pistons aswell are these the correct ones? just to confirm thanks
http://cgi.ebay.com/ebaymotors/CP-Pistons-86-5mm-Nissan-SR20DET-8-5-1_W0QQcmdZViewItemQQcategoryZ33623QQihZ008QQitemZ180144616944QQtcZphoto
Click to expand...
Yep there good to go

JE & Weisco are owned by same company both have oil squiter clearance
CP have shorter skirts (thats why pervy bob likes them) but less of a dish which i was told cuts down on swirl and turbo'd motor work best with dished pistons.

JE's have only a slight recess and are only about $499 with Eric's but either will do the job ;-)
 
J

jpward

Guest
neo2694 said:
I have seen, erics sell a 1.2mm head gasket with 87mm bore size.

Can I fit this head gasket with 86mm forged pistons or this is just for 87mm pistons?


Thx
Click to expand...
Yes they now do 2 types of 1.2mm the normal cometic and the high pressure cometic one both are 87mm you only need the next size when using 90mm pistons ;-)
 
KF79GTIR

KF79GTIR

New Member
Also just thought i would my engine builder has rebuilt a lot of lumps with all different pistons and has found that the JE's score the bores less than any other pistons he has used.
 
J

jpward

Guest
KF79GTIR said:
Also just thought i would my engine builder has rebuilt a lot of lumps with all different pistons and has found that the JE's score the bores less than any other pistons he has used.
Click to expand...
Piston should not score the bore :shock:

Perhaps he means the Je's expand less than others but propper clearance should see all pistons behave the same and not score!
 
CruiseGTi-R

CruiseGTi-R

Member
JE's expand more than other pistons (in fact they're noisy on start up until warmed and expanded a little).

JE suggest 0.1mm piston to cylinder clearance, don't know if this is particularly more than other pistons?
 
stumo

stumo

Active Member
Nismo, i'd ring them if you're unsure about anything, heck i ring anyway and you might get a discount if you're cheeky enough.

Erics performance phone number 001-877-772-0338

Don't forget the time difference:lol:
 
O

Odin

Guest
stumo said:
Nismo, I'd ring them if you're unsure about anything, heck i ring anyway and you might get a discount if you're cheeky enough.

Erics performance phone number 001-877-772-0338

Don't forget the time difference:lol:
Click to expand...

Yes and I'd ask for a discount, My cp's only cost me $499 from JGYcustoms but that was a few years ago, But I'd of thought they'd of gone down in price not up :cry: .



Rob
 
P

pulsarboby

Guest
yep you need to put in your best offer price! i ended up getting mine for £248 and that included delivery, dont be frightened to just put an offer in
 
J

jpward

Guest
Odin said:
Yes and I'd ask for a discount, My cp's only cost me $499 from JGYcustoms but that was a few years ago, But I'd of thought they'd of gone down in price not up :cry: .



Rob
Click to expand...
Someone forget to tell you price of base metals has went up quite a bit in the last 3-4 years due to the surge in China's manufacturing!

But i get your point ;-)

But you can really compare JGY and Eric service wise! :lol:
 
P

pulsarboby

Guest
cp pistons will 110% fit
if they dont then your welcome to beat me round the head with a bucket of warm wet soapy bananas, and then give me a damn good hiding afterwards:lol:
im that confident;-)
 
J

jpward

Guest
pulsarboby said:
cp pistons will 110% fit
if they dont then your welcome to beat me round the head with a bucket of warm wet soapy bananas, and then give me a damn good hiding afterwards:lol:
im that confident;-)
Click to expand...
Interesting term there bob :lol:
 
B

boost

Member
Apolgies for bringing up an old thread but Off hand do you know if wossner pistons clear the oil squirters?

thankyou
 
You must log in or register to reply here.
Top