FAQ - Parts - Weightwatchers II:Post Your Findings

Status
Not open for further replies.

skiddusmarkus

Active Member
Please post weights of any aftermarket bits you have and the parts they replaced eg intercoolers,rads,brakes,suspension,wheels etc and I'll compile them into a nice list.All weights are approximate as weighed on bathroom scales :lol: .

Standard:

Air con bracket(between block and pump)-4kg
Brake caliper(no pads)4.5kg each
Exhaust manifold heat shield-500g
Intercooler including chromed shield and bracket-8kg
Flywheel-9kg
Radiator-2.5kg(dry)
Radiator fan-2kg each
Toe hook-1.7kg


Aftermarket

Koyo radiator 70mm core-5.5kg(dry)
Z32 MAF-500g
Cusco pillowball topmounts-1.7kg pair
Ap paddle plate(plate only)-2kg
Helix organic plate(plate only)-1.75kg
Ap 6 pot caliper and pads-3.83kg
Ap 4 pot caliper annd pads-3.4kg
Wilwood’s Billet Dynalite-1.13kg
Hispec Billet 4-1.7kg
" monster 4-2.2kg
" mega monster 2.4kg
" racing 4-1.45kg
" racing 6-2.4kg
325mm discs with alloy bell-11kg each
Jun flywheel-5kg
Bliz boost controller-250g
Odyssey race battery-6kg
Forge Pulleys:
Power steering 230g (Original 500g)
Alternator pulley 125g
Water pump pulley 237g
Crank Pulley 800g
Forge front mount :
Intercooler core 5.5kg approx
14 jubilee clips 1kg
Samco hosing 4.5kg approx
Stainless steel pipes around 2.5-3kg
Mongoose exhaust-12kg weightsaving
 

Nad

Active Member
Looks like someone has skimmed off my idea here ;)

Got loads of stuff out of the engine bay but thought if I wasnt getting rid of it there wasnt any point or enough time to weigh it all!!

Nad
 

Fast Guy

Moderators
Staff member
Forge Pulleys (weights on kitchen scales)
Power steering 230g (Origional 500g)
Alternator pulley 125g
Water pump pulley 237g
Crank Pulley 800g

Forge front mount
Intercooler core 5.5kg approx
14 jubilee clips 1kg :shock:
Samco hosing 4.5kg approx
Stainless steel pipes around 2.5-3kg (guesstimate)

Turini C/F bonnet 8kg approx

Mongoose (turbo back) exhaust system 12kg less than the standard system, mainly down to tail pipe being 1kg (standard back box was 13kg)
 

Fast Guy

Moderators
Staff member
Tein Super street coilovers - about 4kg (total) less than the standard set up. Something like 5.5kg front and 6kg rear.
 
A

ard1ey

Guest
Pair of boxed Tomei cams - 5kg on slightly dodgy bathroom scales

Power FC (boxed) - not a lot (in best Paul Daniels voice :D )
 

stevepudney

GTiROC CHAIRMAN
Staff member
Anybody know the weight of an aftermarket clutch cover, say HKS, Excedy e.t.c

Or the overall weight of the standard Flywheel and after market clutch as above.
 

nismoboy

New Member
Standard gtir bonnet 26kg
Sunny 1.4 L bonnet with all supports removed 11kgs

Both weighed on bathroom scales.
 

Fast Guy

Moderators
Staff member
CFX carbon Kevlar bonnet about 6kg
Standard bonnet about 16.5kg (can anyone confirm 26kg on another bonnet, incase mine had a lightweight version already :wink: )
 
Status
Not open for further replies.
Top