rear Adjustable Pillowball camber plates

[Spikey]

Is there anything Available to sort the Camber out on the rear?
I seem to have Positive camber on rear one wheel???
I have found these but they are not for a Pulsar but still a good Idea.

http://www.rhdjapan.com/tein-rear-pillow-ball-upper-mount-s13-ps13-rs13-rps13-s14-61570

 

[PobodY]

Can you not elongate/adjust the mounting points for the rear arms? Is there an adjustable version; I think I've seen one, but again it might not actually be for a GTi-R?

 

[iomegalinux]

you can take any camber bolt , the whiteline can give up to 1.25 deg. negative camber.
they're not cheap, but it's plug and play, then you just have to do an alignement.
many other camber bolt will do the job (nissan sentra, etc.. )
http://www.allfordmustangs.com/foru...092-how-do-i-adjust-camber-camber-bolts-2.jpg

 

[PobodY]

That sounds better to me than trying to make pillowball mounts for a different car fit.

 

[Spikey]

Whiteline ones are around 60£ for two bolts.

 

[warpspeed]

Camskill are cheaper £25 a pair, I have them on my car front and rear

 

[watoga]

Camskill are cheaper £25 a pair, I have them on my car front and rear

Is that the standard 14mm bolts on their website?

http://www.camskill.co.uk/m20b0s1332p5780/_CAMSKILL_PRODUCTS_14mm_Camber_Bolts_-_%28S14_200SX_Turbo%29%0A

Cheers,
Dave

 

[Spikey]

they are s14 ones. Will they still fit then?

 

[PobodY]

I think it's a universal fitment for anything that takes a 14mm bolt. - Unlike the top plates, the bolts are pretty universal... I'm happy to be corrected obviously.

 

[splmum]

Is that the standard 14mm bolts on their website?

http://www.camskill.co.uk/m20b0s1332p5780/_CAMSKILL_PRODUCTS_14mm_Camber_Bolts_-_%28S14_200SX_Turbo%29%0A

Cheers,
Dave

Don't know about these but Whiteline bolts are only 12mm, see below

http://whiteline.com.au/product_detail.php?part_number=KCA412

 

[warpspeed]

To be honest I can't remember if they are 12 our 14 but I'll find out, definitely got them from camskill though.

 

[watoga]

I see Camskill also sell a 12mm bolt:

http://www.camskill.co.uk/m8b0s2285...Mitsubishi_Lancer_Evolution_1_2_3_CD9A_CE9A)

It says its for an Evo 1-3, but if our GTiRs are indeed 12mm then it probably shouldn't matter.

Interested to know whether it's 12mm or 14mm.
Cheers,
Dave

 

[splmum]

I see Camskill also sell a 12mm bolt:
Interested to know whether it's 12mm or 14mm.
Cheers,
Dave

See post #10 at the bottom of page 1 and open the Whiteline link, and everything will be revealed.

 

[PobodY]

At that price, I'm tempted to buy a set just in case I need to do some camber adjusting on any of the wheels.

 

[watoga]

See post #10 at the bottom of page 1 and open the Whiteline link, and everything will be revealed.

OK, so the GTiR is 12mm, but now the question is how long is the Whiteline bolt? The Camskill ones are 63mm in length; will this work ok for our cars?

Cheers,
Dave

 

[splmum]

OK, so the GTiR is 12mm, but now the question is how long is the Whiteline bolt?
Cheers,
Dave

The whiteline ones are DESIGNED to suit a GTI-R. So yes they will fit.

The Camskill ones are 63mm in length; will this work ok for our cars?
Cheers,
Dave

Refer to post #6 on page 1, this will answer your question.

Now any more questions, I don't think so, as all the information on the Camber Bolts has been covered I would think.

 

[danr]

you could always ring Mike@camskill, but I agree with post #6 page 1 as above lol

 

[nismo gti-r]

Cusco top plates are adjustable for the rear, or there are some adjustable lower arms out there for the gtir

 

[splmum]

Cusco top plates are adjustable for the rear, or there are some adjustable lower arms out there for the gtir

Got any pics of these, would be interested to see.

 

[Spikey]

Also i thought BC coilovers came with adjustable rear camber plates too. But not sure.