Search results

  1. grim_d

    My Pulsar for sale

    Sold.
  2. grim_d

    My Pulsar for sale

    With a heavy heart I'm selling my black pulsar, The car was put off the road with a startup problem (which is solved now) about 3 years ago and I've just never properly went back to it, I won't have the time or the money to deal with it and would rather see it rehomed than rotting away outside...
  3. grim_d

    Trying to lure anyone to sell/nearly ready too

    Whilst I assume you are looking for a finished car rather than a project, I am probably going to sell one of mine soon but it's not a high spec any more and whilst it runs a drives and would probably pass an mot I'd consider it a bit of a running project.
  4. grim_d

    replacement arch trims

    Im certainly interested in a price for a standard set if they look close to oem but these things often take so long I lose interest or can't commit come the time it actually goes ahead. (far too many expensive hobbies!) So pencil me in but keep an eraser handy.
  5. grim_d

    replacement arch trims

    I could also be interested if they looked oem. I was always interested in trying to cast some polyurethane replacements, maybe with a fibreglass or similar core I looked into it a bit and belive it would be possible to make a close to oem trim. It's an experiment on my long long list of things...
  6. grim_d

    Couple of quick ones please

    1. The complete opposite of what you might assume. The return line goes onto the end where the pressure regulator is. You will soon know if you've done it wrong as it won't get fuel and you will spend a day turning it over and scratching your head. 2. 3 white knuckles or a handfull of...
  7. grim_d

    rear gearbox mount

    That would work fine. I use Dow betafill because thats what my local paint supplies place carries. Sika and everbuild do one too.
  8. grim_d

    rear gearbox mount

    Fill it up with polyurethane seam sealer.
  9. grim_d

    Tow bar?

    Got a welder? Cut and shut one from something else.
  10. grim_d

    Misfire

    Not knowing what mods you have... Ngk bcr8es@0.7mm seems to be the plug of choice up to so much power. (400bhp ish?) they are super cheap. Under £10 for 4. For your misfire you should look at ignition components, I would start with leads then dizzy cap/rotor arm.
  11. grim_d

    Bogdan's elbows

    What's the final price Bogdan? I don't actually need one anymore but may still take one.
  12. grim_d

    Y Bracket

    Definitely not required even with a top mount.
  13. grim_d

    turbo s - what makes people using and costs

    Owens will do a gtx2863r with metal bearing cage upgrade and 5 bolt housing for £940+vat
  14. grim_d

    Bonnet Scoop

    Taking away the cheesegrater scoop is basically the same as punching your gran in the face...
  15. grim_d

    Gearbox noise

    Will be changing it soon. Pulling the whole lump soon anyway by the looks of it. Will have 2 working but poorly boxes. Need to look into rebuilds. Whats the going rate for a 2nd hand box these days?
  16. grim_d

    Hot start misfire

    I could easily, strange thing is that it that when it starts fine, and the fans don't come on at igntion, it idles a bit richer than normal, indicating it's on the default map. However, after the fans came on at ignition and its stumbled and stalled, indicating a lack of signal from temp...
  17. grim_d

    Lambda sensor

    That would sting a bit but it's not as outrageous as it could be. Having said that I did just replace the post cat sensor in my accord for £19.
  18. grim_d

    Hot start misfire

    I am suspicious of the o2 sensor but 1.35v when hot on the o2 gauge in nistune was about 12:1 afr (ish). which is probably about right, it's certainty not wildly off the scale. (Glad I just found out about our cars o2 sensor voltage!) I dont think the fans should ever run with just ignition on...
  19. grim_d

    Lambda sensor

    My apologies, Saw other listings where it listed the gtir such as http://pages.ebay.com/link/?nav=item.view&id=291518481751&alt=web , this listing must be wrong. Our part number is 22690-54C00? Good to know as I might have bought the wrong one one sometime! Just saw your other thread about it...
  20. grim_d

    Lambda sensor

    http://www.ebay.co.uk/itm/201302180937?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT Not unreasonably priced. It is very annoying that it is the skinny type, there are adaptors available to put the larger type in but it looks like it would move the sensor quite far from the stream.
Top