PCV Valve or not?

[Cathode]

I see you running a different MAF ...do you have an aftermarket ecu to so?

R35 MAF on a standard ECU modded to a Ver.3 nistune.

 

[SKELLZ22]

R35 MAF on a standard ECU modded to a Ver.3 nistune.

ok so it must run on a nistune can an safc2 work as well?

 

[Cathode]

ok so it must run on a nistune can an safc2 work as well?

Not sure, might not need it, think the NIstune handles just about everything.

 

[gtirx2]

I don't think you can change to a different maf when using the safc by itself.

You can use the safc with the nistune as the safc is just a piggy back fuel controller.
Really no need for this as if mapped well you should not need to make any adjustments.

Although very basic if setup well the knock meter on the safc2 I find is very useful though.

 

[SKELLZ22]

I don't think you can change to a different maf when using the safc by itself.

You can use the safc with the nistune as the safc is just a piggy back fuel controller.
Really no need for this as if mapped well you should not need to make any adjustments.

Although very basic if setup well the knock meter on the safc2 I find is very useful though.

ok thganks ...ill wait for a standalone then