bfc10
Member
I have recently had problems with the car overheating and coolant bubbling back through the expansion tank.
I have changed my coolant temp sensor and i have 4.98v at the connector and checked the continuity all is ok. The voltage also drops as the coolant warms up.
The fans kick in whilst sat idling, but go out for a run the fans don't kick in after and the 10amp fuse in the drivers footwell (4th one up on the right) is blown, now used about 12 fuses
Any ideas where to look next, electronics are not my strong point
so please be gentle with me ;-)
I have changed my coolant temp sensor and i have 4.98v at the connector and checked the continuity all is ok. The voltage also drops as the coolant warms up.
The fans kick in whilst sat idling, but go out for a run the fans don't kick in after and the 10amp fuse in the drivers footwell (4th one up on the right) is blown, now used about 12 fuses
Any ideas where to look next, electronics are not my strong point