Braveheart
New Member
I think I have knackered my Autometer manual Oil Temp gauge (5741) while fitting. This item was purchased while I was working in USA a year ago along with other autometer gauges and is not a return item.
Having followed the “Caution Label” and making sure I did not micro bend or strain the tubing or probe, the probe end bottomed out when I fitted to a Mocal oil filter relocation mount…. :doh:! Functions more like an oil pressure sensor now... :roll: The sealed housing has come away from the probe.
I'm wondering if it's serviceable, think it's charged with ether and is there a boss that I can fit between mocal and probe to solve the clearance issue. It's about 2mm too long.
Having followed the “Caution Label” and making sure I did not micro bend or strain the tubing or probe, the probe end bottomed out when I fitted to a Mocal oil filter relocation mount…. :doh:! Functions more like an oil pressure sensor now... :roll: The sealed housing has come away from the probe.
I'm wondering if it's serviceable, think it's charged with ether and is there a boss that I can fit between mocal and probe to solve the clearance issue. It's about 2mm too long.

