help with camshafts

red reading

Active Member
To give you some idea, I just did some quick totting up based on a sensible/reliable 550bhp+ spec and I reckon you would be looking at least 5K in box and 12k in engine before you mapped it.
Abit low on the box ed,

Engine turbo etc 12 k
ecu and sundries /sensors and mapping 3k
Gearbox with the full works 7k+

then you need brake's , diffs, roll cage and to seam weld the shell at the front as the car tries to rip itself apart
 
Last edited:

red reading

Active Member
who does the ppg box.
ppg makes the gearsets in australia and i build them, you need the cases welded and braced too.7k+ just gets the gearset, not all the other stuff and labour needed to build it properley...........have you ever driven a car with a dog box?
 

wrc

Member
1k could buy you atleast 5-7 standard boxes.

Thats atleast a years worth of blowing them up at 450+ :-D







I'll get me coat.........
 

red reading

Active Member
1k could buy you atleast 5-7 standard boxes.

Thats atleast a years worth of blowing them up at 450+ :-D










I'll get me coat.........

Mmmm 4+hrs to fit the gearbox, 45 seconds of use. and Gtir boxes that are £150-200 are not shall we say a quality low milage item.
 

John

New Member
This has went from a 5k budget engine build to a well over 30k build in the space of one night......
 

nasserkhan123

New Member
was just looking at the set they do 1st and 2nd then 3rd and 4th separate and 5th separate will i be needing all 5 gears then how much would you be charging for labour.
 

nasserkhan123

New Member
This has went from a 5k budget engine build to a well over 30k build in the space of one night......
mate have you ever been in a situation when you want something so bad you would do what ever it takes to get it. well that's the situation i am in.
 

nasserkhan123

New Member
£4484 for
[h=1]GTiR 1st -2nd Synchromesh Gearset[/h][h=1]GTiR 3rd-4th Billet Selector Forks[/h][h=1]GTiR 3rd-4th Synchromesh Gearset[/h][h=1]GTiR 5th Gear Option[/h]is there anything else i will need to order.
thanks.
 

red reading

Active Member
£4484 for
GTiR 1st -2nd Synchromesh Gearset

GTiR 3rd-4th Billet Selector Forks

GTiR 3rd-4th Synchromesh Gearset

GTiR 5th Gear Option

is there anything else i will need to order.
thanks.

5th gear will be needed as well as the straight cut final drive, then all new bearings and seals from nissan, a set of late model m10 bolted shot peen'd and cryo gear cases and a gearbox brace from the italian, o and you have forgotton shipping and VAT on it all.
 

nasserkhan123

New Member
5th gear will be needed as well as the straight cut final drive, then all new bearings and seals from nissan, a set of late model m10 bolted shot peen'd and cryo gear cases and a gearbox brace from the italian, o and you have forgotton shipping and VAT on it all.
would it be easier if you gave me a list of exactly what to get and where to get it from when i am ready.
 

red reading

Active Member
O and all new sycro baulk rings and syncro energiser springs + the ppg or par billet steel 5th gear syncro carrier.

my cost depends on what has to be supplied.
 

red reading

Active Member
And i won't give out all details of where and who to get it off as it has taken me years to forge the contacts.
 
Top