O2 Sensor wanted A.S.A.P. !!!!

[RO_SUNNY]

Hi guys / gals.

I really need this one A.S.A.P.
I need a brand new one or with small usage ( I already have 3 used one that are not working due to several reasons ((( )


Thanks,
B

 

[RO_SUNNY]

Someone please help!!!!!

 

[Gaz gtiR]

try Bob at GTIR R US! he will most likely have 1

 

[RO_SUNNY]

I am trying to find a new one.

Thanks for the info anyway.

 

[danr]

here

or you want a skinny 12mm one off a red top silvia, will try find cheaper link, on wrong pc..

usefull stuff and bosch catalog and totally geek!

 

[RO_SUNNY]

Hi Dan,

Thank you very much for the usefull stuff!!!!!

The 1'st link I have tryed but the guys from there told me that they don't ship to Romania (my country)

Will the skinny 12mm will work on our cars????

Thanks

 

[danr]

yes it will (must be for RED top, BLACK top is Zirconia; no good), its a titania red/blk/wht wire sensor for the silvia sr20det, canadagtir ausgtir etc all use them :_)
failing that, contact bosch or ntk (who nissan use) direct and tell them you want a 3 wire titania with 12mm thread, probably cheaper than buying a stock part. then you can splice it onto one of the many connectors you must have! lol

 

[Sunny-D]

here

What size thread is this one?

 

[danr]

12mm ...
here sunny-d might help you with 18mm - http://www.sr20forum.com/technical-information-library/154692-sr20det-maf-list-ecu-list.html

 

[Sunny-D]

12mm ...
here sunny-d might help you with 18mm - http://www.sr20forum.com/technical-information-library/154692-sr20det-maf-list-ecu-list.html

I got fed up looking for an 18mm titania so welded in a new 12mm boss yesterday, cheers though.

 

[danr]

happy days, i bought an adapter for £4.50 ;_)

 

[johnny gtir]

Sunny d your in box full where did you buy 12mm boss please

 

[Sunny-D]

from here http://cgi.ebay.co.uk/m12-lambda-se...arts_Vehicles_CarParts_SM&hash=item4aaaac802e

 

[johnny gtir]

Thanks

 

[danr]

or you can ring midland_exhausts and ask for the reducer/adapter from this kit @£4.50
http://cgi.ebay.co.uk/Lambda-Sensor-Boss-Nut-Reducer-Plug-End-M18-X-1-5-/270684260551

 

[RO_SUNNY]

Therefore this is the sensor which I need and can be used on our engines!
http://cgi.ebay.co.uk/Nissan-OEM-O2...t=Motors_Automotive_Tools&hash=item588a78c3f2

 

[Sunny-D]

or you can ring midland_exhausts and ask for the reducer/adapter from this kit @£4.50
http://cgi.ebay.co.uk/Lambda-Sensor-Boss-Nut-Reducer-Plug-End-M18-X-1-5-/270684260551

I used a reducer very similar to that but after fitting copper washers between the boss and reducer/reducer and sensor the tip of the sensor didnt stick out far enough and the car ran like crap.

 

[danr]

Therefore this is the sensor which I need and can be used on our engines!
http://cgi.ebay.co.uk/Nissan-OEM-O2...t=Motors_Automotive_Tools&hash=item588a78c3f2

yes

I used a reducer very similar to that but after fitting copper washers between the boss and reducer/reducer and sensor the tip of the sensor didnt stick out far enough and the car ran like crap.

hmm, i thought this might affect mine too. the tip just stuck out. but it has gills and the pressure of the gasses should blow into them. i used rtv sealant instead of washers, so far so good. the lambda reads between 0.3/0.9 at idle, so okay... atm :_)

but, the pipe should have a reducer in there already. its just a bitch to get out.