Forge actuator

[whytie]

I have a Turbo dynamics MD214 turbo and the actuator won't hold past 360bhp.

The forge one I'm going to order, do I need to as for a certain spring in it? Just looking for 400bhp.

 

[MarkTurbo]

I had the blue spring in mine and it would run 1.1/1.2 bar with no boost controller connected, there is a stronger one though.

 

[whytie]

Thanks, I guessing the standard spring in the forge actuator should be fine then. I'm guessing 400bhp would be around 1.6 bar

 

[pulsarmoley]

This might help:

http://www.gtiroc.com/forums/showth...tor-Spring-Rates&highlight=forge+spring+rates

 

[whytie]

Thanks that was a great help, think ill order the one with the blue spring.

 

[whytie]

Anyone know if the md214 has straight or bent actuator?

 

[whytie]

Straight it is.

 

[pulsarmoley]

Have you got your measurements for the actuator? i.e rod length etc

Dont know if this might be of use to you:

 

[whytie]

No I'm going to remove the turbo in the weekend.

The forge one should do the job

 

[pulsarmoley]

Yeah the above diagram was emailed to me by John Withers @ Forge Motorsport so i could order mine correctly...