Would a GTiR exhaust manifold fit a 200sx ?

[Empty Pockets]

As above really, are the exhaust ports the same shape, or round, i understand the inlet side isn't swappable as the inlet would face the wrong way, and also high/low port differences, but what about the exhaust side ? Would open up the market for my turbo kit.

 

[MarkTurbo]

Gti-r and 200sx manifolds are interchangeable as far as the port sizes/stud pattern goes but a turbo kit for a Gti-r probably wouldn't fit a 200sx. If you look at a 200sx manifold the turbo flange is angled a lot further away from the block and sits further towards the right hand side of the manifold, dont forget the engine is the other way round in a 200sx ;-)

 

[PobodY]

It would bolt-on to the block, but it won't be lined-up with the rest of the exhaust system. - It sweeps down and back.

Maybe it would work with a custom exhaust using a modified elbow?

 

[Empty Pockets]

Thanks chaps, yep undrstood it's in length ways hence the inlet side being no good, the downpipe issue shouldn't a problem, as it'd have to be modded to fit a GTiR let alone a 200sx, but the turbo hitting the block certainly would be..... :-( Bummer... Thanks again for the info though.