Tyre Choice

All,

My wheels came with Dunlop sportmax 9000s (which are discontinued) on. Ive done a good job of taking all the tread off the fronts so its time for new ones.

I guess the obvious is to put toyo proxies on - Ive only had the old model on another car and I wasnt that impressed. Are the new ones pretty good or is it worth sepnding a little more for another brand? I use the car for occasional fast road use. All recommendations welcome!

Thanks,
 
Last edited:

fubar andy

Moderator & N/W Rep
Staff member
Hancook RS2's - Good summer dry tyre.
Yokahama AD08's - Very good grip, more summer based, wet grip is average.
Goodyear F1's - Very good all round tyre, wet and dry.
Uniroyal Rainsport 2 - Recently tried out in the wet and very impressed, I'd say a good wet/winter tyre.
 

johnsy

Active Member
copied and pasted from EVO mag

New legislation on tyre labelling and accompanying minimum standards to be introduced simultaneously in November 2012 will effectively end the production of road-legal trackday tyres. Tyres likely to be axed include the Dunlop Direzza, Toyo 888 (currently available on the Renaultsport Mégane R26.R), Michelin Pilot Sport Cup (Porsche GT3 and GT2) and Avon ACB10 (Caterham), along with a host of others.

The aim of the new regulations is to both raise all-round performance standards and to give buyers a greater understanding of the performance and environmental impact of each particular tyre before purchase. All road-legal tyres will have to display rating figures for rolling resistance (fuel efficiency), external noise and wet grip, and while the rating system and minimum levels have yet to be set, it is unlikely that track-biased tyres will be able to pass on all counts.

Tyre manufacturers are currently lobbying the European Parliament, but it will be very difficult for them to make a successful argument for tyres that allow drivers to corner faster in the dry but which offer a significantly lower level of performance the moment the surface becomes damp.

It is expected that trackday tyres will fall foul of the other parameters too, so their demise is something their manufacturers are already preparing for. James Bailey, Dunlop’s PR chief, believes it highly unlikely that trackday tyres will continue in their current form, although the company’s official position is that these regulations are positive as they will also remove poor performing cheap road tyres from the market. In its own braking tests the difference between the best and worst tyres fitted to a Mondeo stopping from 50mph on a wet surface was as much as five car lengths…

Porsche feels it’s too early to comment and that at this stage it is still a matter for the tyre companies. Once the regulations have been set, the German car maker will still request an appropriate level of performance from Michelin for its top models.

So what does the future hold? There will still be high-performance tyres made from a race-style compound though they are likely to have regular road-car tread patterns. However, they won’t be as fast or responsive as the current crop of trackday tyres, and for those of us who enjoy the extra performance and challenge presented by this specialist rubber that’s a real shame.
 

MarkTurbo

Well-Known Member
R888's have been pretty much out of stock everywhere for months now, i had a nightmare getting hold of mine earlier this year. I got told that it was down to the Toyo factory being in Sendai which was hit by that big earthquake earlier this year but i'm not so sure now as they've had months to get production back up and running again. Wouldn't surprise me if they've binned them all together due to these new rules coming in and are working on a replacement or the rumour i heard about the tread coming apart was true and they've held them back due to that. That might have just been the SG compound i heard that about though.

Or mabye not the cars but the modding and alterations :(
Compared to some countries we're lucky with the modifications we can do to our cars.
 

PobodY

Moderators
Staff member
I agree. - I remember the hoops you had to jump through if you modified anything on your can in Australia; if you can't produce an engineer's certificate for the mods to show that they are designed for the car and don't adversely affect it, it's declared unroadworthy.
There's also none of this "it's exempt because it's an import". If you want to register it, you've got to pay to have it made compliant with local design legislation. - I know the Pulsar needs side-intrusion bars welding into the doors for a start.

I'm pretty sure Belgium has rules that say it has to be a genuine manufacturer's part; so you'd need to prove your flared arches are genuine Nissan ones for a Pulsar/Sunny. - Obviously there is a bit of wiggle room if it's a Nissan part, but not really for the car you've got.

Like the man says, compared to some countries we're lucky.
 

fast eddy

New Member
Back on the subject of tyres, the federal RSR should be safe for a while as it has more water channeling than 888, 048 etc. We have decent stocks at the moment.

Eddy
 

fubar andy

Moderator & N/W Rep
Staff member
Is this a forum or a frigging traders wet dream....all I'm seeing at the moment is plugging and flogging stuff in almost all these kinds of threads.... :doh:
 
Top