Size of bolt holding actuator on

[Edd]

Hi guys, there are 2 bolts that the actuator is bolted onto the turbo, does anybody know the thread size and more importantly the length of the bolt

cheers

 

[gtir303]

sorry dont know the size off hand but if it help i have a complete turbo at home if your going to the pod on saturday u can have the bolts hope this helps

 

[Edd]

thats very good of you, not sure if ill be sober enough to go to the pod, if i cant find the size out i'll let you know
cheers

 

[geetee]

My tubby's off at the moment - I'll take a look tonight if no-one else has posted the ansa b4 then.

Cheers
GeeTee 8)

 

[Edd]

thanks im guessing it'll be m6 or m8 and about 10mm long as there aint much room

 

[GINGA]

8mm and approx 15mm long

 

[seanleed]

8mm and approx 15mm long

Pretty close- M8x16mm (it's a standard size)

 

[GINGA]

Not bad from memory then lol :lol:

 

[seanleed]

Yep, give yourself a pat on the back

 

[Edd]

cheers think i'll try m8 x 10mm and see if i can squeeze that in

should i use any special washer or threadlock to hold it on as can only fit the one bolt by the turbo feed

 

[seanleed]

If your only using 10mm long bolts I'd stick a bit of threadlock on 'cos you won't have enough length to have a split washer on.