Shit in the bell housing

[keastygtir]

Hi Guys

Inspecting my gearbox today there is a lot of oilly shitty stuff inside the bellhousing. It looks wrong to me anybody seen this before?

 

[Fast Guy]

Does it smell like engine or gearbox oil? Rear crankshaft oil seal or gearbox are about the only two places to leak into there.

 

[keastygtir]

didnt smell it to be honest, I did have to replace the crankshaft seal on the other side though

 

[The Doc]

Looks like a leak from the clutch slave from the oil trail, if its gearbox oil just sniff it as it stinks

 

[keastygtir]

Thought it could be slave cylinder but was not sure. Better degrease the inside before it goes back on!

 

[PobodY]

Looks like a leak from the clutch slave from the oil trail, if its gearbox oil just sniff it as it stinks

That was my thought too. - It's been mixing with all the fibres and dust from the clutch and makes a nasty sticky mess.that won't drain out of the bottom.

 

[keastygtir]

could account for the random clutch slippage I used to get

 

[PobodY]

could account for the random clutch slippage I used to get

Strangely enough, that's why mine came out. - It was slipping from the leaking clutch fluid, which then destroyed the friction material... which then got wedged in the cover plate so the clutch wouldn't release:

Clearly I've had a go a degreasing this before reinstalling it:

 

[keastygtir]

That must be what it is. It used to slip randomly just cruising along then be fine again. My clutch is still one piece though