need some help...

[crighton13]

Hey folk might sounds stupid but i cant get my dizzy in to the head has anyone had this before or is there away round it i try wd40 and goodforce but can bearly get it in as far as the rubber seal. Any help is good cheers

 

[rich1216]

you will need to back off the end clamp that holds the exhaust cam and the end of the dizzy, but if it was me i would undo all the clamps on that cam correctly so you dont bend it then torque it all back down

 

[crighton13]

Ok thanks alot lol

 

[vss irvine]

you do realise the dizzy only goes in ones way? the lugs are offset on the shaft.

ive never had to undo the cam bracket.

 

[crighton13]

Yea i know they are off set the but the dizzy isnt getting far enough in for the lugs to even touch the cam

 

[vpulsar]

you do realise the dizzy only goes in ones way? the lugs are offset on the shaft.

ive never had to undo the cam bracket.

I agree I've never had to undo anything to get the dizzy back in, Very strange.

 

[Fusion Ed]

Chances are the rubber seal is preventing it. Remove it and try without, if it goes in easily then thats your problem and you need a new seal.