misfire

rossdj1983

New Member
im wondering which conections are usually the culprits to cause lumpy idle and misfires across the rev range?

done a fault code and nothing- ive also gave most of the connecter blocks a squirt of contact cleaner but no no avail

took out the plugs and they do apper a little wet

any ideas before i end up breaking it?
 

rx jamie

New Member
look on your passenger side of the engine bay. just between the headlight and radiator bottle, is an earth with loads of black wires on it bolted to the chassis. clean that up (both faces) with some wire wool and lube, then reattach it. mines needed cleaning twice now. 90% bet its that . wdo 40 all your connectors too.

other wise check your vaccuum lines.

let us know how you get on.
 

rx jamie

New Member
you mean your plugs are wet as in water outside them in the wells ? or do you mean wet with oil internally ?
 
P

pulsarboby

Guest
who mapped it? is it running too rich!

sounds like its overfuelling to me.
 

rx jamie

New Member
try getting the injectors sonically cleaned. or use some injector cleaner additive in the fuel. could be poor injector spray.
 
Top