HP expectations with current setup!!

M

Master_Sentra

New Member
Hey guys,

My motor is in the break in process and after that it'll be going to the dyno for fine tuning.

According to your experience, what HP numbers should I expect from the following setup runing @ 30-35 psi

 1 Lovefab Topmount exhaust manifold
2 3" downpipe and exhaust line
3 Tanabe Muffler
4 1000cc Power enterprise injectors
5 2 Walbro 255 LPH HP fuel pumps
6 Nismo FPR
7 Garret GT3582R Turbo 0.86 A/R
8 Tial 38mm Wastegate
9 Profec Sheepdog BOV
10 Custom intercooler piping
11 XSPower Intercooler
12 Kelford 186-B cams
13 Supertech Double valve springs
14 Supertech Titanium Retainers
15 Supertech Inner spring locators
16 HKS cam sprockets
17 Headwork
18 Cometic Headgasket
19 ARP Head studs
20 CP pistons and rings
21 Pauter Rods
22 ACL Calico Main bearings
23 ACL Calico Rod bearings
24 ARP Main studs
25 Exedy Hypersingle Clutch Kit
26 Exedy Chromoly Flywheel
27 AEM water/methanol injection kit
28 Crane Hi-6 Ignition Module
29 Crane LX-92 Race Coil
30 Haltech Boost solenoid
31 Haltech Platinum Sport 1000 EMS
32 DEI Exhaut Wrap


Cheers,
 
Mad

Mad

Well-Known Member
Hi,

Nice spec.

You will probably get different opinions but would guestimate aroud 600bhp at that boost if the car is setup correctly.

I have heard of that turbo producing upto 700bhp but that may be a little unrealistic.

If you go over 600bhp you may open up some problems with that spec.
 
Trip

Trip

New Member
I guess in the high 500bhp mark(hopefully more). Considering you didn't list your gearbox, so I am assuming its standard, With that power, you will blow it up.

Nice setup and get back with results.. Goodluck :)
 
M

Master_Sentra

New Member
warringtonjack said:
621.4bhp @ fly


Do we win a prize for the closest guess when you get it run in and dyno'd??? :D
Click to expand...

That's a good idea :thumbsup:......

The one whos closest to the actual number wins a bottle of the original Peruvian Pisco (spirit made of grape juice) to share with your friends or family. If you dont know what it is, google it as "peruvian pisco".



Cheers,
 
M

Master_Sentra

New Member
Now theres a prize involved, I guess we need to set a standard for all the estimations, lets present them in Wheel Horse Power assuming 19% lost between flywheel and the ground. Also lets take the gearbox out of the estimations because the only thing important here is the number on the dyno, I'm sure that once the car is tuned and running at the track I'll be needing a PPG or Quaife box.

The winner will have to give a shipping address so I can mail the Pisco to you.

Let the contest begin

Cheers,
 
Last edited:
N

nismoboy

New Member
If your lucky it might make one run but im pretty confident the hg will blow with that boost. Oh and get yourself a magazine to read while your waiting for it to come on boost. hehe
 
You must log in or register to reply here.
Top