hks3037,what injectors?

[pete-r]

as above,im fitting the new turbo shortly and have installed some 550cc injectors and im looking at running just 1.5bar of boost,until jan2006,will the 550,s be ok for this?or do i need 600,s?

cheers,pete.

 

[nismoboy]

555cc injectors will support 359bhp@3 bar of fuel pressure? this is at 85%duty.

i would say 1.5 bar on the hks 3037 is gonna be around 450bhp so your gonna need 700cc`s to be safe.

 

[zia]

what management are you using as. 555cc will be ok but would not go above 1.5 bar. if you have decent mangement they can increase pulse width on the fuel table and run higher fuel pressure if needed.

zia

 

[pete-r]

im just gonna be using emanage,ive been told that the emanage is up to the job .

 

[j10gtr]

Which 3037 are we talking about whats the Ar of the turbo ??

depending on thexact model i would think at least 700cc injectors would be required.

Thanks
Paul

 

[pete-r]

0.73 a/r exhaust housing.

 

[memski]

600cc minimum, or 700s for that extra overhead

 

[pete-r]

will 740cc be over the top?cant make up my mind :?

 

[pete-r]

also ,will they fit ok into the standard fuel rail?i need something that fits in the standard one ok.

 

[srbpower]

700's should be fine.

http://forum.gtiroc.com/phpbb2/viewtopic.php?t=32020

 

[Rishi]

also ,will they fit ok into the standard fuel rail?i need something that fits in the standard one ok.

the SARD 700cc will fit into the standard fuel rail... most others on the market need their own fuel rail like the JGY 740cc ones for example...



Rishi

 

[Sweeny]

most others on the market need their own fuel rail like the JGY 740cc ones for example...

Speaking of which.....

http://forum.gtiroc.com/phpbb2/viewtopic.php?t=31676&highlight=

Maybe drop V a pm and see if he still has them

 

[Thor]

I have Sard 660cc on it and it runs very good!!! do you have GT3037S???