hks s-afr wiring installation help please

D

DodgeT

Guest
gona have a bash at fitting it this afternoon, can someone please tell me or point me to somewhere where i can find out the relevant wires on the gtir ecu to connect into please :) :)
 
D

DodgeT

Guest
yeh got that, but how do i know which wires are the correct ones on the gtir ecu??
 
I have one in mine and I have the wireing with the instructions in english at home so if u want a copy I can send this / scan this to u over w.end if u want mate?
 
A

AZ STE

Guest
Carl,
If you could email me the details of wiring it would be most appreciated :wink:
 
D

DodgeT

Guest
if anyone can help with the wiring, ideally stating the positions/colours of the wires in the ecu, that'd be great :D

im confused (doesnt take much :? ) with the wiring manual on here, cause on there it looks like the ecu has 3 sections, whereas it has 4 sections (ive got the car stripped as we speak) :shock:
 
D

DodgeT

Guest
right then, we need locations/colours for ;

(wires coming from the safr to the ecu)

yellow (to ecu pressure sensor) = ?
white (from ecu pressure sensor) = ?
red (12v ignition) = ?
black (ground) = ?
brown (rpm signal) = ?
orange (throttle postion sensor) = ?
 
D

DodgeT

Guest
ive just had a quick look at the diagrams, :(
ive got :

yellow (to ecu pressure sensor) = 16
white (from ecu pressure sensor) = 17
red (12v ignition) = 34
black (ground) = 48
brown (rpm signal) = 3
orange (throttle postion sensor) = 37

dont know if these are right or if there tomorrow nights winning numbers :D

can somebody confirm :(
 
C

cashy

Guest
Arent the wires you need on the disc i gave you dodge?

Blast on Sunday?

If not give uncle ian a call 01942 721784
 
D

DodgeT

Guest
right then, done :D thanks to carl for all your help :D here goes....

if you use the ecu harness connector terminal layout in the ecu troubleshooting guide, you can confirm the pin no.s which ill refer to below

code - pin no. - description - ecu wire colour - s-afr wire colour


# - 101 - injector signal - w/b - not applic on s-afr
I - 2 - rpm signal - l/b - brown on s-afr
P - 16 - pressure sensor airflow - orange - yellow (on wire going into ecu)
P - 16 - pressure sensor airflow - orange - white (on wire going from ecu)
T - 20 - throttle pos sensor - w - orange on s-afr
S - 32 - speed sensor - y/g - not applic on s-afr
U - 46 - 12v battery - w - not applic on s-afr
B - 47 - 12v ignition - orange - red on s-afr
E - 48 - ecu ground - b - black on s-afr

the orange wire for P is the one which you cut, the other wires are just spliced into.

hope this helps

:D
 
Top