Driveshaft oil seal change?

B

Brett G

Guest
Got to change this today just thought I would ask if there's anything in particular I should know before doing it, any tips etc??
I have a balljoint seperator and I think all the tooling that I'll need :roll: Just hope its fairly straight forward :?

Brett
 
B

Brett G

Guest
Just one more thing, this is probably a really silly question but where is the best place to put the axle stands whilst doing this job??? :oops: I've got normal stands that haven't got the groved blocks for this car. There are two longitudinal frames which run from front to back either side of the car (probably about a foot in from the sides) Are these strong enough? Or will I just put a hole through the floor if I use those??

I should really know this! :oops: :oops: :wink:
 
O

Odin

Guest
You can put them under the wishbone's where they bolt to the body of the car.

DO NOT PUT THEM ON THE CHASSIS RAIL'S


ROB
 
M

MORRISMINOR GTI-R

Guest
vpulsar said:
You can put them under the wishbone's where they bolt to the body of the car.

DO NOT PUT THEM ON THE CHASSIS RAIL'S


ROB
Click to expand...
i can vouch for this :oops: cost me 4 hours labour to get mine repaired after some bell end jacked it up on the rail :roll:
 
You must log in or register to reply here.
Top