Which Hybrid?

A

Animaldaz

Active Member
It was £400+vat, that was for the hybrid rebuild, I also had a new turbine housing and compressor wheel. Turbo dynamics wanted £495+vat plus any worn parts so would have been near £700, thats too much to spend on a T28 in my eyes.
 
A

Animaldaz

Active Member
Thrust bearing, I dont think you can have a roller fitted to a T28, iirc roller bearing turbos have a specific core to take that type of bearing .
 
keastygtir

keastygtir

Well-Known Member
The turbo centre did mine last christmas. I had it rebuilt 2 days before with a 360 bearing, the went out there way to help me as I had no car. It was £400 wit couple years warranty
 
A

Animaldaz

Active Member
johnsy said:
wot boost/bhp is that pushing

wot other supporting mods you running
Click to expand...
Its basically an ordinary T28 but it has the capacity to cope with higher boost for longer than an oe unit. I guess at 1.2bar it would be well with-in its range with scope to push it a bit further.
I have all the normal mods for this kind of boost including an uprated elbow. Im still on oe ecu/map/injectors/maf.
 
You must log in or register to reply here.
Top