Road Legal Competition Pulsar.
- Thread starter bracpan
- Start date
- Status
Empty Pockets
New Member
What happened about the auction idea ?? (I was hoping you were going to be the guinea pig 
)
)
johnny gtir
Well-Known Member
I should of bought them when martin was down and just stuck them on e bay but I have about 8 sets already i need to sort and cash is tight. nice wheels great tyres and a steal at the price.do you not use flea bay phil ?
There is somebody comming to look at the Pulsar soon...if he buys it all well and good.
If not I will then have raffle it or brake it...will prepair a full list of prices etc to see what interest there is...the same goes for raffling it.
Will have to have serious interest to do either.
If not I will then have raffle it or brake it...will prepair a full list of prices etc to see what interest there is...the same goes for raffling it.
Will have to have serious interest to do either.
Born Again
New Member
It's easy to forget/overlook how valuable the above really is.
GLWS.
Thanks, thats why if anybody is building one to race this is a bloody bargain and would save them a fortune....proven winner on a nation level and years of free advice and experiance thrown in.
I was preparing some paperwork last night if that chap does come down to see the car, and I had loads of bills etc form over the years.....scary really bloody scary amounts of money...probably underestimated the true cost of the car...( I was not mad enough to add them all up)
I never thought in a million years I would have had this amount of problems selling this car, specially when I see what other cars go for...its a sad reflection on the Nissan Pulsar Gtir.
I was preparing some paperwork last night if that chap does come down to see the car, and I had loads of bills etc form over the years.....scary really bloody scary amounts of money...probably underestimated the true cost of the car...( I was not mad enough to add them all up)
I never thought in a million years I would have had this amount of problems selling this car, specially when I see what other cars go for...its a sad reflection on the Nissan Pulsar Gtir.
Ok What I have done is split the car into 2 sections, the Engine, box, turbo , intercooler ecu etc etc then the Complete rolling chassis..
To work out how much you would save on a spec like this print it out and put the new prices by the side of each item...I started but past the asking price very soon. I will have to sell the both sections before I split the car and take a large deposit for each. I will not mix and match its either section or combined for £8500.
Serious enquiries only as Im getting fed up with idiots asking stupid questions.
Pulsar Engine & Rolling Chassis Parts & Prices Engine, Box, Turbo, Exhaust, Intercooler & ECU etc £5500
Forged 87mm CP Pistons
Pauter Con Rods
HKS Cams
HKS Head Gasket
Bryn Slark Gas Flowed head
3 Angle Valve seats
Decked Block and Head.
APR Head & Main Studs + Spare set of Standard studs.
Race Bearings
All Chemically Cleaned
Fully Balanced with Flywheel
660cc Injectors
Garret GT 3071 Turbo and 1 Bar Waste gate.
Apexi FC ECU
G-Reddy Boost Controller 2 stage.
K&N Large air filter with alloy plumbing and G/F Shrouding
Evo 6 Intercooler & Alloy Piping and Silicon Hoses, Mikolar Clamps
& 50mm Blow off valve
Custom made S/S full 3ins Exhaust System (Below 100db)
Helix Paddle Clutch Extra H/D pressure plate
PAR full syncro wide gear internals, Professionally built (good for 450+bhp)
Forged 3rd 4th selector fork.
Professional Rebuilt with Modena Front LSD
Intercooler Water Spray Nozzles
Forge oil separator with Hoses
Poly Bush engine & two G/box mounts
Forge oil separator with Hoses
1 Standard Spare Box, Condition not known
Rolling Chassis £ 3000
Black ,Very good condition NO RUST
Professionally Welded Custom Cages Roll Cage, fits behind dash. Very Very Strong.
All Polybushed suspension
Whiteline Rear subframe location kit
Poly Bushed Steering Rack Bushes
Whiteline Caster Kit
Tein S/S Coilovers with adjustable top mounts & 2 Sets of Springs
K-Mac Camber Bolts front and rear.
Whiteline Anti Roll bars front and rear
Top Custom and bottom front Whiteline strut braces
5th & Reverse Gear Blocker on G/Leaver
310mm Willwood 4 pot alloy Callipers and Disc’s
295mm Rear Disc’s with standard callipers & 4 S/Steal flexi brake lines
Doors, Windows, Wiring, Brake lines New Clutch Master Cylinder, Brake M/Cylinder, Standard ECU, etc. etc.
Cobra Composite FIA Seats & Willans Full Harness Belts.
Black Glass Fibre bonnet with cold air ducting to air filter
Black Glass Fibre Double skin tailgate with Window
Four = 7 x 16 Rota Slipstreams with Good Goodyear F1 Tyres.
Standard Space Saver Wheel & Tyres
I also know locally of a good standard complete engine, turbo and box etc, I could put you in touch with for £1200
Please PM me ASAP if anybody is interested.
To work out how much you would save on a spec like this print it out and put the new prices by the side of each item...I started but past the asking price very soon. I will have to sell the both sections before I split the car and take a large deposit for each. I will not mix and match its either section or combined for £8500.
Serious enquiries only as Im getting fed up with idiots asking stupid questions.
Pulsar Engine & Rolling Chassis Parts & Prices Engine, Box, Turbo, Exhaust, Intercooler & ECU etc £5500
Forged 87mm CP Pistons
Pauter Con Rods
HKS Cams
HKS Head Gasket
Bryn Slark Gas Flowed head
3 Angle Valve seats
Decked Block and Head.
APR Head & Main Studs + Spare set of Standard studs.
Race Bearings
All Chemically Cleaned
Fully Balanced with Flywheel
660cc Injectors
Garret GT 3071 Turbo and 1 Bar Waste gate.
Apexi FC ECU
G-Reddy Boost Controller 2 stage.
K&N Large air filter with alloy plumbing and G/F Shrouding
Evo 6 Intercooler & Alloy Piping and Silicon Hoses, Mikolar Clamps
& 50mm Blow off valve
Custom made S/S full 3ins Exhaust System (Below 100db)
Helix Paddle Clutch Extra H/D pressure plate
PAR full syncro wide gear internals, Professionally built (good for 450+bhp)
Forged 3rd 4th selector fork.
Professional Rebuilt with Modena Front LSD
Intercooler Water Spray Nozzles
Forge oil separator with Hoses
Poly Bush engine & two G/box mounts
Forge oil separator with Hoses
1 Standard Spare Box, Condition not known
Rolling Chassis £ 3000
Black ,Very good condition NO RUST
Professionally Welded Custom Cages Roll Cage, fits behind dash. Very Very Strong.
All Polybushed suspension
Whiteline Rear subframe location kit
Poly Bushed Steering Rack Bushes
Whiteline Caster Kit
Tein S/S Coilovers with adjustable top mounts & 2 Sets of Springs
K-Mac Camber Bolts front and rear.
Whiteline Anti Roll bars front and rear
Top Custom and bottom front Whiteline strut braces
5th & Reverse Gear Blocker on G/Leaver
310mm Willwood 4 pot alloy Callipers and Disc’s
295mm Rear Disc’s with standard callipers & 4 S/Steal flexi brake lines
Doors, Windows, Wiring, Brake lines New Clutch Master Cylinder, Brake M/Cylinder, Standard ECU, etc. etc.
Cobra Composite FIA Seats & Willans Full Harness Belts.
Black Glass Fibre bonnet with cold air ducting to air filter
Black Glass Fibre Double skin tailgate with Window
Four = 7 x 16 Rota Slipstreams with Good Goodyear F1 Tyres.
Standard Space Saver Wheel & Tyres
I also know locally of a good standard complete engine, turbo and box etc, I could put you in touch with for £1200
Please PM me ASAP if anybody is interested.
Last edited:
Its not set in stone yet but I have had an offer for the engine etc is there anybody interested in the rolling chassis.....its a perfect track day or competition car ready for an engine. Just work out the costs of all the parts plus its a totaly rust free original body.
Last edited:
BlackGTI-RMatt
Member
How much for rolling chassis mate as I've got spare engine to go in but wat's hard now a days is finding a clean shell!
littlewimp
Member
good luck with the sale, same old story but if i had the money i would of had it off you months ago.
Cheers your not that, you far away either ? I know a few have said the same and I believe them, just hoping that one of you come into some money via the lottery...lol
I don think the chap who is coming over wants it to race, that will be a shame but there again at least it will be all in one peace, which is something....if I win the lottery I would keep it without doubt and race it until my next car was finished.
I don think the chap who is coming over wants it to race, that will be a shame but there again at least it will be all in one peace, which is something....if I win the lottery I would keep it without doubt and race it until my next car was finished.
Last edited:
littlewimp
Member
Ive always been dead keen on hillclimbing Phil and have seen you competing several times, never really had any interest in R'S then, got myself a mallock with the intention of having a go but its still unfinished after 5 years, so ive decided to try and sell it and cut my losses. not having much luck with that either! fingers crossed that we both end up with the right outcome. cheers neil
- Status