Norris designs intercooler set up

[johnny gtir]

As in title must be the Norris set up even if core is poor condition.

if anyone has one but wont sell, measurements pictures I would get one custom made I will pay for your time thanks

 

[Empty Pockets]

There's a few different one's, there's the thin cored version which is good to 450'ish iirc, or the custom Garrett cored one's same as he used on the swevo, both piperuns fit without having to cut holes in the inner wing/engine bay though.

 

[fubar andy]

Do you not have to drop the rad down for the ND intercooler set up?

 

[Empty Pockets]

Don't know about the first one, but the second one is quite custom so you might have to do something with the rad, you have to relocate the little pas cooler bar with my set, and remove aircon obviously as it sits more to the front, nature of the beast with the high hp/custom stuff though, even more so with these cars... If the OP wants the first kit there's probably better equivalents these days tbh, i heard it wasn't a very big core and suitable for much over 400hp, if you want the second you'll probably have to go direct to ND for it as i only know of one, for reference my bro bought one recent'ish for his evo build (same core & car specific piperun) and it was 1200 or 1300 for ghe intercooler & pipework, working well on a 35hta @ 2.3bar though,

 

[Empty Pockets]

Oh yeah, If it's the 2nd kit you're after and are handy with the welder, wanted to build your own, i can give you the core measurements if that's what you're after?

 

[vss irvine]

Yeah there are brackets that need to be bolted to the underside of the front crossmember to lower the rad.

 

[geoff pine]

Do you not have to drop the rad down for the ND intercooler set up?

. Or use a custom built rad it works with mine very we'll but then it's not a track car .

 

[johnny gtir]

great replies its the fact the pipe from turbo I am 99% sure dose not cross the manifold

 

[lakeview]

not had time to take photos of the se nissan one johnny.ill take some when i get in from work
the norris design one i had was very similar to the radtec intercooler(i think but its been a few years since i had it might be remembering wrong) it came with brackets ect didnt need anything moving
if your going to get something custom made ill bring the pipe work from a pace and a se nissan one up wouldnt be to difficult to copy them

 

[Fusion Ed]

Would be interested to see if the one stolen from a car near my old workshop ever turned up!!!

 

[geoff pine]

great replies its the fact the pipe from turbo I am 99% sure dose not cross the manifold

Yes straight from turbo over the top of the rad and under the slam panel .

 

[sparkie]

I have got a Norris designs stage 1, from my first pulsar& not got around to fitting to second, might be up for sale.. So slight trimming of the grill required lowering of the radiator but not by much& air conditioning can stay in place..