Search results

  1. mightydquinn

    ENGINE BLOCK REQUIRED

    Is it standard pal? Do you have the crank caps with it? And lastly, we're are you based and how much do you want for it!? Thanks!
  2. mightydquinn

    ENGINE BLOCK REQUIRED

    Hello all, I am wondering if anyone has a standard engine block available please? Mines broke and I need a new one! Thanks Chris
  3. mightydquinn

    Team GTIR - TOTB 2017

    Make 2 of everything and we'll throw the spare set in my shed!! Not that I need it as obviously I never break anything...... but just incase!! Haha!
  4. mightydquinn

    Team GTIR - TOTB 2017

    You won't win!! Lol! Unless your running 8 second or less quarters and you have can then completely set up for handling too, different tyres, adjusting/bolting on wings etc etc! But on the plus side, it's a good weekend out! :)
  5. mightydquinn

    Team GTIR - TOTB 2017

    You won't crash, it's just an airfield with lots of small cones so there's nothing to crash into!
  6. mightydquinn

    Team GTIR - TOTB 2017

    My cars all up and running good at the moment, so yes, reckon I could be good to go! :)
  7. mightydquinn

    OS GIKEN R2CD CLUTCH

    I sure did pal! Haven't done many miles on it yet though! You liking yours?
  8. mightydquinn

    OS GIKEN R2CD CLUTCH

    Cheers pal! I shall have a look! :)
  9. mightydquinn

    OS GIKEN R2CD CLUTCH

    Hello all, It looks like I have just about destroyed my clutch, I have done a couple of years or so with this clutch, so could now do with another and I actually liked this clutch. I am wondering if anyone knows the best company/cheapest place for me to get another Os Giken R2CD?? Cheers Chris.
  10. mightydquinn

    Internal gearbox upgrades

    Thanks matey! That will be really helpful as I'm just about to ring Nissan now! The parts numbers will be very helpful! :)
  11. mightydquinn

    Internal gearbox upgrades

    Yep, it's annoying when the other parts keep breaking! I didn't realise that the gearbox internals were still available from Nissan brand new! I shall buy whatever, springs, new synchros etc that I can get from Nissan and get them cryo treated. And I shall buy the 3rd to 4th and 5th gear Par...
  12. mightydquinn

    Internal gearbox upgrades

    It's done a few track days and been to Nurburg since its last build so I don't think it's that pal! It just needs more new.... Better bits to go with the quaife gearset! I was just wondering who knew what was good and what's around, and were to get it! I've got 2 weeks to get it all done as I'm...
  13. mightydquinn

    Internal gearbox upgrades

    Hello all, I went down to Llandow circuit this weekend and after a long drive down from Leeds in Yorkshire, my gearbox failed in selecting gears properly again after a massive 10 f*****g minutes on track. It didn't select 3rd properly, then was stuck in 4th, then would select nothing and now I...
  14. mightydquinn

    Team GTIR - TOTB 2017

    I'll probably be up for this! I entered 2014 and went to watch last year as my mate entered in his Renault 5 turbo. I may even enter this year to be honest too!
  15. mightydquinn

    Summer plans with your gtir?

    Just like every year, lots of track days, break it and repair it!! Oh and deffo Le Mans again this year! :)
  16. mightydquinn

    Garrett GTX Series

    It drives really good pal! I've just brought it back today and it has a really good, very strong smooth pull to it! A suggestion by Ed if I wanted to get more power would be a proper manifold and he would expect that to break 500 horses! I'm happy with it as it is though TBH, I wanted 450 and...
  17. mightydquinn

    Garrett GTX Series

    I'm going to pick it up tomorrow, but Ed did well, he managed 472.6BHP and 440lbft at 2 bar boost! :)
  18. mightydquinn

    Garrett GTX Series

    I'm only on a t25 flange .86 housing and just a ported cast manifold. Everything else is done properly though, block from Danny and Martyn, Manley rods and JE pistons, heads all been gas flowed by Racing Developments, now has piper cams and Tomei cam verniers which are all set up by ed and...
  19. mightydquinn

    Garrett GTX Series

    I'm running a GTX3071R, it's at fusion still at the moment. It made 423 @ 1.5 bar boost. Hopefully going to be running at 2 bar after the new actuator is fitted but then I think at very best we're expecting high 400's! I don't think we'd get those figures quoted on our old R's to be honest from...
  20. mightydquinn

    A big thanks

    No worries matey! Glad it's all coming together and hope it all works well! :)
Top