Search results

  1. williams

    ideal road car power

    whats peoples opinions on the best power for a road car? 300, mid 300s, over 400? its got to get to a point where you have too much power for narrow UK back roads.
  2. williams

    R hard to push

    is anyone elses gtir very hard to push? no engine or interior, no brakes. im thinking a rear diff problem?
  3. williams

    yoko prada spec 2 tyres

    What's peoples opinions on these? Been offered a set brand new for £150.
  4. williams

    dta ecu

    s40/s60 anyone used one on thier R? wondering if they are compatible with the nissan cas or if id need a crank trigger for it?
  5. williams

    mazworx manifold

    has anyone used this before? http://www.ebay.co.uk/itm/Nissan-SR20DET-DIY-Ramhorn-Style-II-Turbo-Manifold-Kit-/270377972803?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D4%26po%3DLVI%26ps%3D63%26clkid%3D6416199718074515532 are they any good?
  6. williams

    standard oil pressure

    oil pressure warning switches whats the standard oil pressure on these engines? been that long since ive drove mine i cant remember.was going to fit a 1.4bar oil pressure switch but not sure if thats too high? will it light the warning light on idle at 1.4 bar?
  7. williams

    what is the purpose of this?

    anyone know what this plate is for? just curious.
  8. williams

    crank seals

    do all sr20's use the same crankshaft seals?
  9. williams

    fitting alternator to rear of engine

    anyone fitted thier alternator to rear of engine? seen a few 200sx's with this done? gunna have a try next week at doing it. using electric PAS and water pump so got plenty room.
  10. williams

    where can i get.....

    does anyone know where sells the parts below: the gaskets for inbetween the 3 parts on the inlet plenum/manifold a brake master cylinder rebuild kit, or just the seal between mc and servo mainly or if there is a larger nissan mc that fits the gtir servo? ive looked on ebay and google but...
  11. williams

    max lift brian crower valve springs

    does anyone know what the maximum lift cams you can use with these valve springs? http://www.ebay.co.uk/itm/Brian-Crower-Dual-Valve-Springs-SR20DET-RNN14-GTiR-SR20-/200272077446?pt=Motors_Car_Truck_Parts_Accessories&hash=item2ea1256286
  12. williams

    anyone used Acewell dash displays before?

    going to get either http://acewell.co.uk/Acewell%20Speedometers/ACE-5xxx/ACE-5656.htm?action=full&id=169 or http://acewell.co.uk/Acewell%20Speedometers/ACE-7xxx/ACE-7659.htm?action=full&id=66 probably get the 2nd one as its slightly bigger. just wondered what they were like for reliability...
  13. williams

    front side exit exhaust

    has anyone getting onto track with 1 of these fitted? are they mega loud?
  14. williams

    good suspension

    Does anyone know if bilstein make suspension for the pulsar? Can't seem to find any kits from them.Don't really wana use bc or d2 or tein.
  15. williams

    good intercooler?

    was looking at this, http://www.siliconeintakes.com/product_info.php?cPath=7&products_id=208&osCsid=8faa1ed6aabcab7979d916025d3b9b68 it seems fairly cheap for what it is. whats your opinions.
  16. williams

    200sx CAS and coil packs

    Are these a direct fit to the gtir head? Just need to know if they physically fit.
  17. williams

    bargain!!!???

    this has to be worth it?? http://www.ebay.co.uk/itm/1993-Nissan-Pulsar-GTi-R-Breaking-spares-/220814295551?pt=Automobiles_UK&hash=item33698ec1ff
  18. williams

    pedal boxs

    anyone fitted a pedal box to their pulsar? im wanting to get rid of all the shit in the engine bay and get wiring down to a minimum when i make my new loom. thinking of sing one of these...
  19. williams

    560cc injectors

    560cc injectors Good condition £100 delivered Straight gtir fitment
  20. williams

    arp rod bolts

    anyone know where the cheapest place for these is? found some on usa ebay for £50 delivered but would rather buy from uk if i can.
Top