Search results

It came with a lot of nismo goodies when I bought the shell, saw a dyno print out for it, was over 500hp, shell was really nice

Thanks mate, I've just spoke to them and the confirm the piston size are the same for the gtir and gti

Anyone know if the rear brake callipers are the same on the sunny gti, my brakes seized up so looking for a kit to rebuild mine and the only kit I can find says it's for a sunny n14 gti, need to replace the bleed screw also, what size willi need. thanks in advance

Depends which version, the older 1 needs the sleeve supplied with the clutch

Got footrest on eBay mate

Didn't put any camber bolts on, i know the can't be adjusted but thought 20 years later there might be a mod that can sought this, took my car for a blast today and its very skittish even at 40 into a roundabout, car pulls to the left on straight, everything is recon'd or new, poly bushed...

How do people adjust these? got my tracking done, front coilovers weren't the issue but the guy couldn't adjust the rears, cambor bolts will only adjust it a few degrees. My rear right are 0.20' positive, should be between -1.45' -0.15' Rear left are -0.23' again should be between -1.45' -0.15'

my bad, a lot of people want them, there's heated mirror glass for an N14 with wiring on ebay http://www.ebay.co.uk/itm/NISSAN-SUNNY-N14-1990-1995-DOOR-FLAT-HEATED-MIRROR-GLASS-/370866923852?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item565964294c you can use a relay to switch or just fuse it...

I told you they were sold mate and they went far cheaper then £100, it was too little too late matey

SOLD today mate

Red 1991 gtir pulsar imported in 2007 so in very good condition, paint work and trim are all good, comes on standard 14" pulsar wheels, will need 2 tyres tho. ecu, dash, full interior, all looms inc engine loom are all there, has standard brakes all round with uprated pads. Umbrella is...

Best thing to do is check the connector that comes out the ignition battery with a voltage meter probe, iirc the thick white 1 is constant live, black and white is ignition and the ground is all black but double check with a voltage meter

no mate birmingham

I've got 2 doors in ivory sitting in my shed

I had a blueprint in mine for 3years on stock boost, lasted a few years after that at 310bhp

What you looking at spending?

my mate needs an uprated low milege turbo, a clutch good for atleast 450 torque and an alloy rad Contact number is 07780887496 or post on here and i'll pass on a message

Need a standard air filter box and soft pipe to turbo, Z32 afm if anyone has any

No mate, need atleast 750's

anyone got any, need to be in perfect working order, can go larger with the injectors