Search results

  1. S

    Wanted

    2mm headgasket for an 86.5 mm bore if anyone has one :thumbsup:
  2. S

    RPS Clutch

    Just thought i would see if anyone had one before i buy new
  3. S

    Wanted

    Plug for a Z32 AFM please guy's or if anyone knows where i can get one Thanks
  4. S

    Wanted

    Good standard Bore block with good bores and no main bearing seat damage. Cash waiting Thanks Shaun:-D
  5. S

    FPR FuelRail Adapter?

    Anyone know where i can get one from?
  6. S

    How to set your TPS

    Ok firstly, this is your Throttle Position Sensor (TPS from here on in..) What the numbers mean; 1. This wire is the power supply for the TPS, should read about 5.12V 2. This is the return wire that runs to the ECU and tells it how far down your foot is, ie, the position of the throttle.. 3...
  7. S

    Be careful !!!!!!!!!!!!!!!!!!!!!!

    This guy is bidding on his own item to bump up the price,be careful http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=016&item=260001302662&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1
  8. S

    Struggling to tickover

    Hi guy's,i changed my clutch and flywheel the other weekend and for the first 2 days the car seemed fine,but one morning i started the car and it was stuggling to tickover,as if there wasnt any choke.And if i pulled up at a junction the revs would drop to around 600 and then bounce up and down...
  9. S

    Clutch Fork?

    Hi guy's,changed my clutch and flywheel last week,but have noticed the clutch fork is wobbling from side to side,andy ideas?
  10. S

    Torque Setting?

    :D Hi guy's,anyone know the FlyWheel Torque settings please :?:
  11. S

    Partnumber?

    :D Hi guy's,anyone know the part number for the Fidanza flywheel?
  12. S

    ADVAN WHEELS?

    :D Hi guy's anyone know of any UK Dealers for these rims :?: Done a lot of searching with no joy :wink: I would appreciate any help 8) .
  13. S

    Running Fault?

    :D Hi guy's,a mate of mine has had a problem with his car for a while now that causes it to seriously hold back,its spec is frontmount,walbro,blitz airfilter,3 inch exhaust,AVCR set at 14psi low and 17psi high,SAFC2 mapped by a tuner.I have changed sparkplugs(NGK BKR8IEX set to 0.7mm,new fuel...
  14. S

    Input Shaft Bearings?

    :D Hi guy's,anyone know the best place to get them from :?: Also is there a 'How To' on how to change them :?:
  15. S

    Poor Scooby LOL!!!!!

    :D Comin back from my Dads this evening,i pulled up behind a silver Scooby with silvered windows,big exhaust etc,etc,etc,you know ..........the usual stuff :lol: .So we pull around the lights onto the dual carridgeway and i could see he was waiting to see what i was gonna do(which was not alot...
  16. S

    Lambda?

    :D Hi guy's,posted this in the sticky above,but no reply :roll: So trying it here incase no-one saw it :lol: Right,i did a lambda check on my car a couple of weeks ago and when i started the car in the checkmode and flicked the throttle the engine check light flickered as the revs rose and...
  17. S

    Clunk on startup!

    :? Hi guy's,more problems :wink: Went out to my car tonight and started it as usual(turned the key with no accelerator)and got sort of a timing chain hitting the case type noise for a split second :shock: :? .The car drove fine all the way to my mates house(about 4 miles away)and when the turbo...
  18. S

    Will It Never End?

    :D Hi guy's, :cry: Yet another problem has arose :cry: Now my Walbro is playing up.It's been quiet until yesterday and now has a very loud high pitch whine :evil: and now and again will make a grateing noise :evil: Any ideas :?:
  19. S

    AVCR Question!

    :D Hi guy's,just a quick question.Me and my mate are both running Apexi AVCR's to control the boost and after a so called tuner cocked mine up i reset it and started again,i have set the boost at 1kg/cm2 with a duty of 53% and on the first run out it had learned i.e.the 3 stars(***),but since...
  20. S

    I'm BL**DY FED UP!!!!!!!!!

    :cry: Hi guy's,i bought a shift light the other day,fitted it and all works fine :D ,now the thing is i had to test it out :D and after a couple of times driving the car and changing at 7k revs i did the usual wind down(drive for a couple of mile at normal road speeds) and then reversed onto my...
Top