Search results

jap performance blue R for SOLD :shock: :doh: well the time has come to try and let the japanese performance featured R go to a new home.no rush on selling it but i just do not use it anymore and am back in to sportsbikes.8) car is running perfectly at 398 bhp and 360 lb ft torque(a video...

can anyone with a power fc pro and commander tell me how to record peak readings and view them via the commander.ie ; knock= then view the highest recorded reading after driving for 10 minutes etc:-D all help appreciated

:doh: :? before anyone moans the SEARCH function would not work i have been given a z32 maf ready for my mapping but am confused.:doh: it has just four wires where they need soldering.:-D yellow red black purple is this a different model or a different maf or ok for the jjob in...

just got back from elvington from the rwyb and saw andy forrest complete a 9.29 second quarter:thumbsup: then the day was washed out again.:roll:

8) :D anybody any experiences with the os giken single plate clutch kits ? how are they to use? etc? cheers

HELP right i have got my engine back from being fully rebuilt and when looking around it i think i have found a small problem which needs sorting....but i am not sure. :oops: the dipstick tube looks lower than normal can somebody measure it with out the dipstick in and tell me the height...

:?: are standard equipment gti-r actuators adjustable or are they preset to 0.6 bar from the factory :?: depending on out come from this q can you recommend anywhere to buy an adjustable actuator from

:? yes i have searched but get conflicting opinions.what clutch will handle 400bhp/400lbft 8) in single plate without going down the very expensive route or os giken route as i have heard far to many stories of destroyed gearbox casings with the quaife and os clutches. :shock: :shock: :cry...

can people please post a picture of the passenger side chassis leg as the cd containing these pictures has vanished.need to see what brackets go where under bonnet. thanks stu

i am ready to purchase an uprated head hasket. i want one 1.2 mm thick and am looking in to hks.block has been bored to 87mm so does that require a gasket with 87mm holes. are there any other make 1.2mm gaskets available. where from and how much thanks

:? are there two different thickness of rear brake discs on the r as i have seen some for sale which are thicker than my standard ones.

:? right i am going to be building the head section of my engine in the next few weeks.it consists of the following fully ported and polished head hks 264 cams jun vernier cam wheels standard springs and valves where would be best to set the verniers to on the adjustment scale. anyone...

:? :shock: can any body tell me the part number for the rear quater glass trim clips. these clips go behind the plastic and clip in to the body

i am ready to buy some uprated camshafts for my r. what make do people reccommend are tomei 260 cams any good. what duration is best to go for- for fast road application. i have heard of hks 264's,tomei 260's but no others. what others are there and where can they be purchased from

i have now got my engine in bits and noticed the crowns/tops of the pistons are really oily .....why is this.the oil is really thick and drynot fresh :? its not a great deal as it will be rebored anyway :twisted: :twisted: :twisted:

8) i have just purchased a fully rebuilt gearbox with quaife internals done by hiteq and was talking with the guy i bought it off about ratios. :? :?: what are the ratios of the kit v's standard :?: how does this effect gearing/speeds :?: all i do know is that fifth is standard ratio...

any body got a pic of a gab strut brace fitted --front please :?: :D

right basically i am beginning a complete resto job on my r and have sold off most of the tuning parts on it.so what i would like to know is what front mount do you have as i am going to have to purchase a new kit soon= what do you think of the new spec-r front mount kit. :?: is it home...

:D hi can anyone post up pics of pulsars resprayed.ie blue for me please.all shades of blue if possible.or do you know anybodys username so i can search them rishi can you go through your extensive piccie collection please cheers all 8)

:D what mods have to be done to the tail gate to fit a uk number plate surround to a jap spec car.as my car is having a full respray soon and like the idea of the uk surround. 8) anybody :wink: :?: