Search results

  1. S

    469 BHP White GTIR

    Hi All, Sadly I'm having to part with my R after being an owner again for just over a year. The car had a full engine rebuild less than a 1000 miles ago and has been mapped several times by Ed @ Fusion. The Spec is as follows: Pulsar GTIR - Import 57,000 miles SARD Fuel Pressure Regulator Z32...
  2. S

    Manifold Gasket

    Does this DP manifold below use the standard nissan gasket where you bolt the turbo on with the 4 bolts? I've got to remove it as Mr Bodger who had the car before me didn't brace t properly on the engine block which in turn has put pressure on the external waste gate pipe and cracked the weld...
  3. S

    Advice on some connector plugs I've found in the engine bay

    Hi All, I've recently got myself an R running nearly 500bhp and can't wait to start driving her around in the better weather. I've had the car for 2 months now but keep finding little things that need doing as through previous owners a lot of things have been bodged. In the engine bay I have...
  4. S

    injectors

    Whats the best type of injector to go for to handle around 450 horses. Thanks
  5. S

    Help me choose a TURBO for 400 bhp

    Right, there are that many to choose from and I have been on the net for hours and cant come to a decision :( I want to run around 400 bhp with fast spoolup. Here's my spec below: Full rebuild by GMP Motorsport in association with DP Motorsport. New engine block 87mm HKS shallow skirt...
  6. S

    Buy a subaru front bumper for your R

    For anybody sad enough - here u go : http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=72206&item=7975812961&rd=1
  7. S

    Stainless Steel Manifold - Very Nice

    Peeps, I have been in touch with a manufacturer in another country and I have got them to produce a manifold for our cars and he is making a dump pipe as we speak 8) What do you think: It is made from T304 stainless steel and is 2.5mm thick. Initial price is around £330 but if we get...
  8. S

    What boost would you run with this spec ?

    Hi peeps, An R I'm looking at has the following specs:  HKS forged 86mm pistons  HKS vernier pulleys  HKS 2.0mm head gasket  HKS valve springs  Kent cams (284)  The head has had extensive porting and polishing  The crank has been balanced and lightened  The con rods...
  9. S

    Manifold on Ebay - 1 day left

    here yuo go: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=4538690691&ssPageName=STRK:MEWA:IT
  10. S

    GARRETT T3/T4 TURBO STAGE 5 HYBRID 360 thrust bearing

    Does this fit the R or will it fit with a bit of messing :?: I have the chance to buy one very cheap :wink:
  11. S

    Turbo Questions ?

    Will the GARRETT GT30R fit the R with a bit of modding :?: Will the Garrett GT45 Dual Roller Bearing Turbo fit the R with a bit of modding. :?: It Will support 1000hp+, but has a T4 Flange, 0.66 Inlet A/R, 1.06 Turbine A/R
  12. S

    No Mileage after fitting new speedo

    :shock: I got a speedo off a member on here and I have fitted it. I connected all 4 connectors up to the new speedo and everything seemed to work fine apart from the miles are now not clocking up on the overall mileage meter or the gradual mileage meter. :shock: The new speedo was missing a...
  13. S

    URGENT Turini Bonnet

    I need help deciciding if this bonnet looks better than than the Standard R one. I have the chance to buy this Turini Bonnet for £100 but I need to let the lad know with the next hour :roll:
  14. S

    Map ur own ECU

    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=7950596482&ssPageName=STRK:MEWA:IT Sounds a bit fishy I think :roll:
  15. S

    Combined FMIC & rad

    What do you all think :?: 8)
  16. S

    Now I'm in a fudging mess

    HELP :!: I tried to fit my new brake discs today which didn't seem that bad but when I came to fit the new pads I couldn't get the caliper back over the disc. I tried all sorts to try and push the piston back into the housing to give me more room but it wouldn't budge :shock: Any Ideas...
  17. S

    Fitting Tarox 255mm grooved discs

    Hi all, I am going to fit the above this weekend. Are they easy to fit and can anybody give me any pointers :?: Thanks Shayne
  18. S

    Tarox 255mm grooved discs

    I have aquired 2 of the above with EBC red stuff pads. What's everyones general opinion on em :?: Are they any good :?: They feel very heavy :!: Are they heavier than the standard ones :?: Cheers Shayne
  19. S

    Air con - pipe removal

    Hi Peeps, I have removed the air con but I still need to remove the pipes that run through the bulk head and under the glove box I assume. Where do these pipes go to and what exactly do I need to remove now. Is there a unit under the glove box :?: If anybody has any pics that would be a...
  20. S

    Problems after fitting FMIC

    O.k, today I had the pleasure of fitting my front mount and removing the air con while I was at it :twisted: After fitting the front mount I now have 2 pipes left over which used to go on to the TMIC. What does everyone else do with these :?: I now have a lot more lag :evil: . It used to sit...
Top